Search Products
Search Products
ISW-500T
Industrial 5-Port 10/100TX Compact Ethernet Switch
- Description
- Specification
- Application
More practical and convenient thanks to its compact size
The industrial-grade PLANET ISW-500T Industrial 5-Port 10/100TX Compact Ethernet Switch has 5 10/100Mbps auto-negotiation ports, an IP30-rated durable but small housing, and a flexible redundant power supply that can operate at 1248V DC or 24V AC. The ISW-500T can function in any challenging environment and can do so at temperatures between -40 and 75 degrees Celsius.
Because it has a Plug and Play feature, the ISW-500T is specifically made to enable the establishment of an industrial network simple as the trend for an IIoT (Industrial Internet of Things) infrastructure is gradually becoming more in demand. Additionally, it has a solid and dependable quick data and power transmission system.
Green Networking with Low Power Consumption
The ISW-500T offers link-on cable length power saving and link-down power saving techniques by utilizing cutting-edge green networking technologies. Due to these qualities, the ISW-500T consumes relatively little power even while operating at full capacity, allowing for efficient energy conservation without sacrificing performance.
The ISW-500T can automatically detect cable link state and network traffic using the Auto Power Saving and IEEE 802.3az Energy Efficient Ethernet (IEEE) Protocol, and can then modify power usage accordingly. It makes it possible for the switch to use less energy while it is not in use.
High Availability Network System Dual Power Input
The ISW-500T is a robust dual power input system that can accept wide-ranging voltages (12V–48V DC or 24V AC) and is integrated into the automation network of the customer to increase system uptime and dependability. In the example below, if power supply 1 stops functioning, the hardware failover capability will immediately turn on to continue operating the ISW-500T with power supply 2 in the event that power supply 1 fails.
Strong Protection
For Ethernet ESD protection, the ISW-500T offers contact discharge of 6KV DC and air discharge of 8KV DC. In order to increase product stability and safeguard users' networks from damaging ESD attacks, it also offers 4KV surge immunity. This ensures that business operations run smoothly.
High-Performance Switching
A high-performance switch architecture is provided by the ISW-500T. With its 1K MAC address table and 5 10/100 Mbps Fast Ethernet ports, which offer non-blocking switch fabric and wire-speed throughput of up to 1 Gbps, the ISW-500T can transport packets at wire-speed without the worry of packet loss. The ISW-500T can deliver quick and dependable data transfer thanks to the flow control feature.
Connect and Play
The ISW-500T's RJ45 copper interfaces are all 10/100 Mbps auto-negotiable for the best speed detection over RJ45 Category 6, 5, or 5e connections. Any Ethernet device's type of connection can be determined by the standard auto-MDI/MDI-X functionality without the need for specialized straight-through or crossover connections.
Purchase Information
ISW-500T Industrial 5-Port 10/100TX Compact Ethernet Switch (operational temperature range: -40 to 75 degrees C)
| Hardware Specifications | |
|---|---|
| Copper Ports | 5 10/100BASE-TX RJ45 auto-MDI/MDI-X ports |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 1Gbps (non-blocking) |
| Throughput (packet per second) | 0.74Mpps@ 64 bytes |
| Address Table | 1K entries, automatic source address learning and aging |
| Shared Data Buffer | 448K bits |
| Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
| ESD Protection | 6KV DC |
| Enclosure | IP30 metal case |
| Installation | DIN rail kit and wall-mount kit |
| Connector | Removable 6-pin terminal block for power input Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 |
| Alarm | One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC |
| LED Indicator | System: Power 1 (Green) Power 2 (Green) Fault Alarm ( Red ) Per 10/100TX RJ45 Ports: 10/100 LNK/ACT (Green) |
| Dimensions (W x D x H) | 70 x 104 x 30 mm |
| Weight | 255g |
| Power Requirements | Dual 12~48V DC, 24V AC |
| Power Consumption | Max. 1.1 watts/3.77BTU (Power on without any connection) Max. 2 watts/6.86BTU (Ethernet full loading) |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) |
| Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3x flow control and back pressure IEEE 802.1p Class of Service IEEE 802.1X Port Authentication Network Control IEEE 802.3az Energy Efficient Ethernet (EEE) |
| Environment | |
| Operating Temperature | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
Aimed towards Heavy Industries
The IP30-rated metal case of the ISW-500T is especially made for usage in heavy industries like factories, harbors, warehouses, and more. By swiftly conveying incoming and leaving data, it can be placed at these organizations to improve work effectiveness.
Related Products
We Bluboxx Communications, Supplier of Fast Ethernet Switches such as 5 Port Industrial Ethernet Switch, ISW-1600T, IFGS-1822TF, ISW-800T-M12, ISW-801T, ISW-800T, ISW-501T, ISW-500T, ISW-511T / ISW-511TS15, ISW-511 / ISW-511S15.
ISW-500T Industrial 5-Port 10/100TX Compact Ethernet Switch, suitable for industrial use, features 5 10/100Mbps auto-negotiation ports, IP30-rated rugged but compact case and a wide-ranging redundant power system (12~48V DC or 24V AC). The ISW-500T is able to operate in any harsh environment with operating temperature ranging from -40 to 75 degrees C.
We Serve all these Fast Ethernet Switches in Pune, Mumbai, Kolkata, Bangalore, Chennai, Hyderabad, Delhi, Noida, Thane, Indore, Jaipur, Nagpur, Mangalore, Nashik, Coimbatore, Bhopal, Baroda, Surat, Ahmedabad, GOA, Gurgaon, PAN India