PROFIBUS PA Tester


PROFIBUS PA Tester

Universal Application:

The PROFIBUS PA Tester allows testing of the bus physicsIn addition.It verifies that the communication between the bus devices table.This makes it a universal tool for setup and commissioning, documentation, acceptance,testing, preventive maintenance,and troubleshooting

Very Simple to Use:

A display and two function buttons provide outstanding ease of use.The bus test starts automatically when the tool is connected to a PROFIBUS PA network. The test results are clearly classified as either OK or BAD. This tool is an ideal choice even for less experienced users

Fully Automatic Bus Test:

After attaching the tool to the PROFIBUS PA network, the PROFIBUS PA Tester is powered by the fieldbus and automatically starts testing the segment without operator intervention. If the measured data exceeds the tolerance limits, the operator is informed in plain text At the segment level, the tool determines the segment voltage as well as average noise and peak noise for three frequency ranges. Short circuits between the individual signal wires and the cable shield are reliably detected. At the field device level, the PROFIBUS PA Tester reports all frame retransmissions and all devices added or dropped during bus operation. The current and the lowest signal levels of all devices are also determined No PC or notebook is needed for testing the bus. If required, the PROFIBUS PA Tester stores the test data for later transfer to a PC via USB. The detailed test reports can be imported to Microsoft® Excel or exported as text files.