TDP-100 - PROFIBUS DP ACTIVE TERMINATOR


TDP-100 - PROFIBUS DP ACTIVE TERMINATOR

Profibus TDP-100 Terminator is an active terminator created to make possible handling any communication bus node in full operation. Thus the nodes can be turned off, removed or replaced without harming the transfer of data from the other nodes. The devices on both ends of the net can be removed without affecting the intermediary nodes, whose termination ends must stay constantly turned on.
   The Profibus DP Terminator can be mounted on standard 35mm DIN rail. An indication LED indicates the status of the 24V source and the correct bus operation.
   The Power supply and the communication cables are connected by terminals with fixed screws and also the Profibus bus can be accessed by a DB9 connector.

Reference:
TDP-100
Composition:
  • 24Vdc Power Supply
  • Galvanic Isolation
  • Cable A ac. EN50170
  • 1 power supply indication LED
  • 1 Profibus DP frontal DB9 connector
  • 1 connector per Profibus DP terminal block
  • Supports all Profibus protocols: DP, DP-V1, DP-V2, PROFIdrive, MPI, etc.
  • Baud Rates:
  • 9.6K, 19.2K, 45.45K, 93.75K, 187.5K, 500K, 1.5M, 3M, 6M and 12M
  • Fixation:
  • DIN35 rail (DIN EN 60715 TH35)
  • Material:
  • ABS plastic
  • Dimension::
  • 94 x 27 x 77,5mm
  • Weight: